How to make a bali hut

In a bali hut you will feel that you have reached your own haven, its small tropical style structure give you a peaceful and heavenly feel. People who experienced these types of huts want to add it to the decoration of their houses. Making these huts is not a difficult task, with few things and materials it can be made very easily. With very less effort you can create your own paradise.

Things that you are going to need to make it is chalk string line, level, 8-by-8-inch treated lumber posts, 2-by-4-inch treated lumber, 2-by-6-inch treated lumber, Galvanized deck screws, 3-inch length, 1-by-1-inch furring strips, Screw gun or drill, Roofing nails, Heavy duty staples, Hammer or nail gun, Thatching material, 3-inch L brackets and Staple gun. All this material is required for making these huts.

The first thing that you will have to do for making it is to draw a scratch of the design you want to have for the hut. Then you will have to judge the space on which you want to place the hut, whether the design can be make on that space or not.  After that it is to decide whether to install a simple structure, with poles to support it and a roof, or if what you want a more detailed design for that, with deck floors and steps. The corner post will need to be set in the ground for a detailed structure and the height of post need to be 12 feet.

Measure the delineation of the bali hut and use chalk string line to mark the line clearly on the ground. You will have to pound on the stake at the each corner where the post needs to be set.

After digging the holes at the stake for the posts, place them on place one at a time. Make sure each post is level with other. Fill the holes that you have dig for the post to put in properly and strongly. Support them with 2-by-4-inch section of lumber on either side of the post to be satisfied that they will remain putting.

Cut lumbers of 2-by-6-inch for the external measurement of the posts. Taking accurate measurements is very important so that the front and the back will extend 2 inches from the posts. First screw the back pieces then put other two sides. Screw them to the both sides of the posts.

You will need other people to help you to raise the boards, and screw them together. You can add many other things as you wish to the huts.